Heres what happens.... serial#001A07 234189
using 3x lock, the car attempts to start but stalls. A few seconds later, it automatically tries again and succeeds in starting.
Upon entering the vehicle, however, i cannot shift out of park.
the windows do not go up/down. The car does not lock/unlock using the keyfob.
------------------
i spliced the 2 wires in the white 15-pin connector. I wired them to the red/black cables on the THarness. The ends that run through the wiring harness are the ends i wired(not the ends sticking out of the connector). I'm not sure whats going on.